Baldor VEJMM3314T 15HP, 3475RPM, 3PH, 60HZ, 215JM, 3734M, ODP, F1 ELECTRONIC MODULES

Baldor VEJMM3314T 15HP, 3475RPM, 3PH, 60HZ, 215JM, 3734M, ODP, F1 ELECTRONIC MODULESSpecs Catalog Number VEJMM3314T Enclosure ODP Frame 215JM Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 15. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead

B2-5C Performance

7 a Front Face Code Brake Mounting Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3642M Mounting Arrangement F1 Number of Poles 4 Overall Length 23

Frame Material Rolled Steel Impregnation Method Dip and Bake Polyester Shaft Material SAE 1040/45 Carbon Steel Painting Only primer Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap No-Without Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Resilient Base Without Overload protector (phenolic) Without overload protector Features

lb Locked rotor torque 250 % Breakdown torque 320 % Locked rotor time 28s (cold) 16s (hot) Moment of inertia (J) 1

Frame 447/9TS Output 300 HP (220 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2972 rpm Slip 0

3x(Code H) No load current 11

9x(Code E) No load current 20

90 A Rated torque 1

875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1760 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

lb Locked rotor torque 229 % Breakdown torque 350 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 1

96 IN Power Factor 80 Product Family WD All SD Non-Encapsulated Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

75KW VOLTS 230/460 AMP 3